Our blasters can be used equally well at low or high pressures. We feature a lightweight 3/8" sand hose and a small nozzle assembly ideal for delicate, finely detailed work, as well as for large blasted areas. The small diameter nozzles we supply with the blasters allows the efficient use of a small compressor (2hp acceptable, 5hp recommended). Larger nozzles are also available.

Minor assembly is required and instructions are included. The model 100B-S comes with an air-activated footswitch. The air-controlled valve turns the stream of abrasive and air on and off immediately. This is a very convenient accessory.

Specifications
Wheels	yes
Abrasive Capacity*	100 lbs.
Approximate Blast Time**	1-3 hours
Hose***	10 feet

* Capacity listed for silicon carbide; with sand, slightly less.

**Estimate based on average abrasive settings and operator techniques.

*** Hoses supplied are all 3/8" i.d., best for most projects an any pressure. 1/2" hose and nozzle assembly available separately for use on very large projects.